XtremepowerUS Premium Automatic Suction Vacuum-generic Climb Wall Pool Cleaner Sweeper In-Ground Suction Side + Hose Set

Price: $82.39
(as of Jul 04, 2024 06:05:20 UTC – Details)

Product Description

Requirements:

Connect to Pump

1 HP power pump or above are recommended to use for this pool cleaner.

Connect to Filter

For better usage, the filter is recommended to be washed every week and kept it clean.

Function of yellow seal clip

Weighted stabilizer properly use the seal clip to keep the balance when you clean the pool. Recommended each Clip is for every 3-foot of depth of your pool.

How to use eye ball diverter

Adjust or twist eye ball divert to change the flow of water and to make sure the water flowing can be inside with right direction.

Instructions:

Hoses need to be right length

The length of the hose is very important while using a pool cleaner. With a hose that is too long you can get it tangled while moving around and with one that is not long enough you may get some spots that are not clean. Provided with adjustable hose lengths you can add or take off the amount of hose needed for your pool for the best fit.

Clean up debris from flapper regularly

When using the pool cleaner you should always remember to clean the flapper regularly. Before and after you start using the pool clean cleaning the flapper can greatly increase the flow of the cleaning making it more efficient and fast. Check inside the flapper for debris that might be stuck or debris that is building up and may cause future problems.

Tips: Please do not put the pool cleaner into the pool during the non-pool season to avoid the debris get into the flapper, and clean up it first before you start to use it in the beginning of pool season.

No air in the hoses

To get the optimal usage out of the pool cleaner, there should be no air in the hose while it is running. To avoid this issue, please leave the cleaner inside the pool as it will extract out air with water. Once its done, follow the instruction manual to operate.

Avoid erosion

Most of the pool chemicals or bleach would erode the materials of this product. To operate correctly, please wash the product after every usage and away from water. Specifically, except pool season, store the pool cleaner be outside of the pool in order to make it avoid erosion.

Smart Design – Adjustable Cleaner

Adjustable cleaner and diverter make it climb the walls of your pool and being a new cleaning pattern, also, it can be used by different positions by opening to redirect the return line water flow to clean properly in your pool, both of above ground and in ground.

Smart Design – Removeable Flapper

Freely moveable flapper is designed for prevent debris from being lodged inside. Debris can be removed by following instructions:

1. Taking out the screw from piffle plate and pulling it out.

2. Removing the flapper from main body and removing the debris.

3. Inserting the flapper back into the main body and snapping the baffle plate back.

Smart Design – Adjustable Hose

Adjustable hose length by adding and remove extra hose sections which designed for reaching the end of the pool and better cleaning. It also can make it easy to position cleaner. (Important: The pump must be on when you check the hose length. The hose is getting shorter when the pump is operating and it will become longer when the pump is off).

Smart Design – Silicone ripple cleaner

This flat smooth surface seal can be used for concrete, tile, vinyl, and fiberglass finish pool. Easy to clean and gets rid of stains.

Troubleshooting and Maintenance:

The pool cleaner is able to clean algae, small pool dirt and dust. However, leaves are not supposed to be cleaned by this pool cleaner.

To avoid damaging the product, please do not use it to wash stairs in the pool. This product can safely work on curved surfaces without any issue.

Do not put the pool cleaner into the pool during the non-pool season to avoid the debris get into the flapper, and clean up it first before you start to use it in the beginning of pool season.

1: To decrease the water pressure for avoiding getting stuck, the spring should be adjusted as the step 1 to loosen the regulator.

2: To increase the water pressure for strengthening suction, the spring should be adjusted as the step 2 to tighten the regulator.

10 hoses included for up to 30′ pool. Ideal for cleaning bottom surface and wall; does not clean stairs
Require at least a 1 hp swimming pool pump or 1600 GHP to function properly.
No tools required and no electricity needed; Attaches to your existing filtration system
Cleaner should be moving about the pool at a rate of 8 to 12 feet per minute. Eco-friendly automatic pool cleaner vacuum designed for high efficiency and low maintenance.
Automatic operation by self-navigating around the water on set patterns for the top to bottom pool cleaning. Refer to the PDF attached below in Technical Specification for the Manual and Troubleshooting Guide